ASIA unversity:Item 310904400/18664
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 90570/105786 (86%)
造访人次 : 16339498      在线人数 : 306
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻
    ASIA unversity > 資訊學院 > 資訊工程學系 > 期刊論文 >  Item 310904400/18664


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://asiair.asia.edu.tw/ir/handle/310904400/18664


    题名: Improved liquid crystal pretilt angles by patterned dual alignment coating structures
    作者: 陳兆南;Chen, Chao-Nan
    贡献者: 資訊工程學系
    日期: 2010-07
    上传时间: 2012-11-26 13:56:43 (UTC+8)
    摘要: The pretilt angles for the optically compensated bend (OCB) mode liquid crystals have been improved using novel patterned dual alignment coating structures in this study. The transition from the splay configuration to the bend configuration can thus be effectively reduced. The dual alignment coating structures consisted of a horizontal alignment polyimide (PI) and a patterned vertical alignment liquid crystal polymer (LCP). Three patterning masks were designed for the photolithography process. The pretilt angles were demonstrated to be increased to 34 degrees for the triangle lattice array-patterned cells. It became 31 degrees for the square lattice array-patterned cells, and 24 degrees for the honeycomb lattice array-patterned cells. The improved pretilt angles were illustrated by the force balance model that can be predicted by the LCP area ratio. The effective control over the pretilt angle could improve the response time to 2 ms when the voltage was ramped up to 5.5 V for the OCB mode liquid crystal devices.
    關聯: JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY;10(7):4592-5.
    显示于类别:[資訊工程學系] 期刊論文

    文件中的档案:

    没有与此文件相关的档案.



    在ASIAIR中所有的数据项都受到原著作权保护.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈