English  |  正體中文  |  简体中文  |  Items with full text/Total items : 90452/105769 (86%)
Visitors : 11928570      Online Users : 359
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version
    ASIA unversity > 資訊學院 > 光電與通訊學系 > 期刊論文 >  Item 310904400/25264

    Please use this identifier to cite or link to this item: http://asiair.asia.edu.tw/ir/handle/310904400/25264

    Title: An array configuration to increase the performance of a biosensor
    Authors: 程德勝;Ching, Congo Tak-Shing;張剛鳴;Chang, Kang-Ming;Hung, Yu-Lung;Hung, Yu-Lung;Ch, Chin-Kang;Chen, Chin-Kang;Yon, Kok-Khun;Yong, Kok-Khun;Jian, Yue-Xiu;Jiang, Yue-Xiu;Sun, Tai-Ping;Sun, Tai-Ping;Shie, Hsiu-Li;Shieh, Hsiu-Li
    Contributors: 光電與通訊學系
    Keywords: Uric acid;Biosensors;Array;Amperometric;Signal-to-noise ratio
    Date: 2013
    Issue Date: 2013-07-11 13:59:59 (UTC+8)
    Abstract: This study aims to investigate whether an amperometric biosensor in an array configuration can increase its signal-to-noise ratio (SNR) so as to increase its performance, like sensitivity. Uric acid biosensor (UAB) was used as an example in this study. Both single UAB (UAB-1 × 1) and UAB array (UAB-1 × 2 and UAB-1 × 3) were fabricated with uricase immobilized on commercial graphite working electrodes. The UAB showed an excellent (r2 > 0.96) linear response range (0–0.8 mM) and moderate response time (∼20 s). Results showed that the sensitivity and SNR of UAB can be significantly increased by the use of an array configuration. It was found that the sensitivity and SNR of the UAB-1 × 3 is significantly higher (p < 0.05 in all cases) than that of the UAB-1 × 1 (sensitivity: 3.1-fold; SNR: 4.4-fold) and UAB-1 × 2 (sensitivity: 1.9-fold; SNR: 3.4-fold). Moreover, an excellent linear relationship (r2 = 0.96) was found between the sensitivity and SNR. Finally, the UAB showed good repeatability (maximal relative standard deviation = 4.9%) and long-term stability (retained 92% of its initial value of current response after storing 60 days). In conclusion, the use of an array configuration can result in the increase of SNR, subsequently resulting in the increase of sensitivity.
    Relation: SENSORS AND ACTUATORS B-CHEMICAL;178(1): 465–472
    Appears in Collections:[光電與通訊學系] 期刊論文

    Files in This Item:

    File SizeFormat

    All items in ASIAIR are protected by copyright, with all rights reserved.

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - Feedback