ASIA unversity:Item 310904400/4384
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 90451/105768 (86%)
造访人次 : 11142141      在线人数 : 385
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻
    ASIA unversity > 資訊學院 > 資訊傳播學系 > 期刊論文 >  Item 310904400/4384


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://asiair.asia.edu.tw/ir/handle/310904400/4384


    题名: Using parallel line information for vision-based landmark location estimation and an application to automatic helicopter landing
    作者: Z. F. Yang;W. H. Tsai
    贡献者: Department of Information Communication
    关键词: Landmark;Vehicle navigation;Location estimation;Computer vision;Parallel lines;Vanishing points;Collinear points;Helicopter;Identification marking;Landing site;Automatic landing
    日期: 1998-08
    上传时间: 2009-11-25 10:31:08 (UTC+8)
    出版者: Asia University
    摘要: An approach to landmark location estimation by computer vision techniques is proposed. The objective is to derive the position and the orientation of the landmark with respect to the vehicle by a single image. Such information is necessary for automatic vehicle navigation. This approach requires lower hardware cost and simple computation. The vanishing points of the parallel lines on the landmark are used to detect the landmark orientation. The detected vanishing points are used to derive the relative orientation between the landmark and the camera, which is then utilized to compute the landmark orientation with respect to the vehicle. The size of the landmark is used to determine the landmark position. Sets of collinear points are extracted from the landmark and their inter-point distances are computed. The positions of the collinear point sets are evaluated and used to determine the landmark position. Landing site location estimation by using the identification marking H on the helicopter landing site for automatic helicopter landing is presented as an application of the proposed approach. Simulations and experiments have been conducted to prove the feasibility of the proposed approach.
    關聯: Robotics and Computer-Integrated Manufacturing 14 (4): 297-306
    显示于类别:[資訊傳播學系] 期刊論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    0KbUnknown297检视/开启
    310904400-4384.doc36KbMicrosoft Word307检视/开启


    在ASIAIR中所有的数据项都受到原著作权保护.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈