ASIA unversity:Item 310904400/79859
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 90453/105672 (86%)
造访人次 : 12049894      在线人数 : 96
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻
    ASIA unversity > 管理學院 > 國際企業學系 > 期刊論文 >  Item 310904400/79859


    题名: Damage layer study of the overcoat deposited on the top magnetic layer of hard disks
    作者: 葉榮輝(RONG-HWEI, YEH)、趙宗明(T.M.Chao)、譚安宏(A.H.Tan)
    贡献者: 光電與通訊學系
    关键词: Damage layer;Diamond-like carbon;Top magnetic layer;Hard disk;Taguchi design
    日期: 2014-02
    上传时间: 2014-06-05 12:20:25 (UTC+8)
    摘要: This paper presents the effect of nanoscale damage layer on magnetic results obtained from the optimization of media overcoat deposition parameters on the top magnetic layer on magnetic hard disks. We have investigated the effects of interface interaction between the overcoat deposition parameters on the top magnetic layer on the media by using a plasma enhanced chemical vapor deposition (PECVD) on next generation hard disks. The goal is to achieve a reduced damage layer, lower head media spacing (HMS) and a higher spectrum of signal to noise ratio (SpSNR) optimized by using Taguchi experimental design with a four-factor three-level (L9) orthogonal array. An analysis of variance (ANOVA) was carried out to interpret the measured coercivity (Hc), HMS and SpSNR. It was found that source gas type is the most significant factor with a percentage contribution effect of 59.8% on HMS and 51.7% on SpSNR. The bias voltage is the second most significant factor with its percentage contribution being 24.2% on HMS and 31.0% on SpSNR. Overall, the optimum SpSNR was obtained using a C2H2 source gas, −100 V bias voltage, 50 V anode voltage and 20 sccm gas flow rate, respectively.
    显示于类别:[國際企業學系] 期刊論文


    档案 大小格式浏览次数


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈